Table of Contents
Advertisement
Important: The maximum wire length for the external sensor should be limited to 100 feet low capacity
Note: If you have more than one sensor associated to the same unit controller, by default the
Figure 35. Sensor cable routing
Field Supplied
10K Type 2
Thermistor
Note: When installing the WCS-SB/R sensor in a refrigerator or freezer where the temperature may
BAS-SVX40K-EN
cable (25pf/ft or less).
temperatures will average. This is undesirable if using the external sensor for refrigeration or
freezer monitoring. Some work will be required in Tracer TU to create a new point and remove
the refrigeration temperature from space temperature averaging. See
Temperature Sensor Setup," p. 93
Wireless Network chapter.
fluctuate, we recommend using a Thermobuffer to slow down the temperature change. This will
help preserve the battery life of the sensor.
WCS–SO/SCO
section in the Using the Tracer® TU Service Tool with a
and –SB/R Installation
2
"WCS-SB/R Refrigerator
47
Hide quick links:
Advertisement
Table of Contents
