Operation; Changing Temperature Settings; Changing System Settings; Changing Fan Settings - Trane Wired Temperature Sensors Installation, Operation And Maintenance Manual

Operation

This section describes sensor operations.

Changing Temperature Settings

To change temperature settings:
•
•
•

Changing System Settings

To change system settings:
•
•
Notes:
•
•

Changing Fan Settings

To change fan settings:
•
•
Notes:
•
•
BAS-SVX10C-EN
For sensors with temperature setpoint thumb wheels (located on top of the sensor), rotate the
thumb wheel to the desired temperature setting.
Note: If you need to change or replace a thumb wheel, see
Wheel (optional), " p.
For sensors with dual temperature sliders (located on the right front of the sensor): Slide the
blue (cool) slider to the desired maximum temperature setting. Slide the red (heat) slider to the
desired minimum temperature setting.
For the display sensor, see
Cooling Temperature Settings (dual setpoint systems only), " p.
For sensors with system thumb wheels (located on the upper left side), rotate the thumb wheel
to the desired setting.
For the display sensor, see
Not all sensor models have all system setting options.
The effect of setting changes are dependent on the unit controller. See specific unit controller
manual for details.
For sensors with fan thumb wheels (located on the lower left side), rotate the thumb wheel to
the desired setting.
For the display sensor, see
Not all sensor models have all fan setting options.
The effect of setting changes are dependent on the unit controller. See specific unit controller
manual for details.
21.
"Changing Temperature Settings, " p. 27
"Changing System Settings, " p.
"Changing Fan Settings, " p.
"Changing the Setpoint Thumb
and "Changing Heating and
27.
28.
28.
23