Trane Air-Fi WCS-SB Installation, Operation And Maintenance Manual page 49

WCS–SO/SCO and –SB/R Installation
2
Temperature
Use the UP or DOWN arrows to toggle between degrees F and degrees C.
Temperature Offset
The temperature calibration offset is adjustable in increments of 0.1 degrees F or 0.1 degrees C to a
maximum of +/- 3.6 degrees F or +/- 2.0 degrees C.
Relative Humidity
Displays relative humidity in 0.1% increments. See "RH Sensor Module" that follows in this subsection
for more information about the RH Humidity sensor module.
Relative Humidity Calibration Offset
Use UP and DOWN arrows to adjust the RH humidity calibration offset in increments of +/- 0.1% RH to a
maximum of +/- 5.0% RH.
Motion Test
In this mode, the display will count down from 120 seconds giving the installer 2 minutes to adjust the
sensor position for proper range for the area. When motion Is detected within the range of the beam, the
sensor eye will glow red briefly.
BAS-SVX40K-EN 49