Changing Temperature Settings; Changing Heating And Cooling Room Temperature Settings (Dual Setpoint Systems Only); Changing System Settings; Changing Fan Settings - Trane WTS Installation, Operation And Maintenance Manual

Operation

Changing Temperature Settings

This symbol shows the current room
temperature, or your temperature setting,
.
while you are making an adjustment.
When you select a setpoint, this symbol
appears.

Changing Heating and Cooling Room Temperature Settings (dual setpoint systems only)

Some systems allow you to select both heating and
cooling room temperature settings. If your system
has this option, this symbol appears when you
adjust the temperature setting.
When you adjust the cooling setting, the top arrow
and snowflake flash.
When you adjust the heating setting, the bottom
arrow and flame flash.

Changing System Settings

Indicates that the system is in cooling mode.
Indicates that the system is in heating mode.
Indicates emergency heat. It is used by facility
operators or service technicians only.
Indicates that the system automatically switches
between heating and cooling as needed.
Indicates that the system is Off.

Changing Fan Settings

Indicates that the fan will operate as needed
to reach the selected temperature.
Indicates that the fan setting is On. 
The number of arrows indicates fan speed 
(3: high, 2: medium, 1: low). 
The example shown indicates a fan on high
speed. Not all systems offer all three speeds.
Indicates that the fan setting is Off.
32
1. To increase the room temperature, press
To decrease the room temperature, press
2. To confirm, press
to the home screen.
1. Press or
setting.
2. If in cooling mode, press
heating mode, press
3. Press or
4. To confirm, press
will appear.
Note: The heat/cool setpoint offset (deadband) chosen during
configuration will apply.
1. From the home screen, press
menu appears.
2. Press or to choose the desired system setting.
3. When the symbol for the desired setting appears, confirm
your choice by
• Pressing (the home screen will appear), or
• Pressing or
• Waiting five seconds.
1. From the home screen, activate the fan setting menu by
pressing and then
2. Press or to choose the desired fan setting.
3. When the symbol for the desired setting appears, confirm your
choice by pressing
or wait 5 seconds. The display will return
to select the heating/cooling
to change to heating mode. If in
to change to cooling mode.
to select the heating/cooling setting.
or wait 5 seconds. The home screen
. The system setting
(the next menu will appear), or
.
(the home screen will appear).
.
.
BAS-SVX04G-EN