Trane Air-Fi WCS-SB Installation, Operation And Maintenance Manual page 87

Using the Tracer® TU Service Tool with a Wireless Network
Close Network
Select this Tools menu option to prevent new members from joining the network.
Remove Device From Network
Select this Tools menu option to remove the WCI and its associated unit controller to which Tracer TU is
currently connected from the wireless network.
Disband Network
Select this Tools menu option to disband the network. Tracer TU must be attached to the network
coordinator.
Join Network
Select this Tools menu option to allow the WCI to join the network. (Appears when you are connecting to
a member WCI. It is grayed out if you have already joined the network.)
Create Network
Select this Tools menu option to create a new network in which the attached device will be network
coordinator. Typically, used for a unit controller that will be network coordinator when no Tracer SC is
present.
Advanced
Select this Tools menu option to display the Advanced tab. Examples are shown in the next two figures.
Figure 58. Advanced tab: When connected to a unit controller with associated sensors
Use the following Advanced tab to change the network channel on all WCI and sensors in the network.
This feature is useful when changing the network channel to avoid interference with Wi-Fi or other
Zigbee devices. See "Changing the Channel of a Wireless Network" in the Tracer TU Help for
Programmable Controllers for the correct procedure.
BAS-SVX40K-EN 87