Changing Room Temperature
This symbol shows the current room
temperature, or your setpoint selection
.
while you are making an adjustment.
When you select a setpoint, this symbol
appears.
Changing Heating and Cooling Room Temperature Settings (applies to some systems)
Some systems allow you to select both
heating and cooling room temperature
settings. If your system has this option, this
symbol appears when you adjust the
temperature setting.
When you adjust the cooling setting, the top
arrow and snowflake flash.
When you adjust the heating setting, the
bottom arrow and flame flash.
Changing the System Setting
Indicates that the system is in cooling mode.
Indicates that the system is in heating mode.
Indicates emergency heat. It is used by
facility operators or service technicians only.
Indicates that the system automatically
switches between heating and cooling as
needed.
Indicates that the system is Off.
Changing the Fan Setting
Indicates that the fan will operate as
needed to reach the selected
temperature.
Indicates that the fan setting is On.
The number of arrows indicates fan
speed
(3: high, 2: medium, 1: low).
The example shown indicates a fan on
high speed. Not all systems offer all
three speeds.
Indicates that the fan setting is Off.
BAS-SVX04C-EN • Wireless Sensors
1. To increase the room temperature, press
To decrease the room temperature, press
2. To confirm, press
return to the home screen.
1. Press
or
setting.
2. If in cooling mode, press
mode. If in heating mode, press
cooling mode.
3. Press
or
setting.
4. To confirm, press
screen will appear.
1. From the home screen, press
menu appears.
2. Press
or
to choose the desired system setting.
3. When the symbol for the desired setting appears,
confirm your choice by
•
Pressing
•
Pressing
or
•
Waiting five seconds.
1. From the home screen, activate the fan setting menu by
pressing
and then
2. Press
or
to choose the desired fan setting.
3. When the symbol for the desired setting appears, confirm
your choice by
•
Pressing
(the home screen will appear), or
•
Pressing
•
Waiting five seconds.
or wait 5 seconds. The display will
to select the heating/cooling
to change to heating
to change to
to select the heating/cooling
or wait 5 seconds. The home
. The system setting
(the home screen will appear), or
or
(the next menu will appear),
.
or
(the next menu will appear), or
Operation
.
.
33