Trane Air-Fi WCS-SB Installation, Operation And Maintenance Manual page 67

•
•
•
•
•
•
•
•
•
BAS-SVX40K-EN
When directly connected to Tracer SC+ the 'Open Network' button appears to be available under
the wireless menu but does not currently work. Instead, connect directly with one of the unit
controllers in the network.
The functionality of the left-hand navigation (LHN) may be compromised depending on your
circumstances. For example, the tree may not consistently show the device name as expected. To
refresh, select the Wireless menu and List Devices. Use this list to Attach to a device that is not
showing up as expected. Alternately, try Device Discovery to repopulate the LHN.
Some of the functionality under Network Health may also behave differently.
– Unit name may display as a "short Address".
– BACnet Message column may show unreliable information at times, depending on the
circumstances.
Channel Quality Scan may not scan as fast as expected.
Communication History is not available.
Under the Wireless menu, Advanced is not a valid option when not connected to a Tracer SC/SC+
coordinated network. As such, you will not be able to change the Zigbee channel using Tracer TU.
To change the channel, manually disband the network, change each WCI NET rotary dial to a new
channel, then change each sensor address to match.
Under Wireless menu, Network Details may show incomplete information. The GRP-NET may show
as 0-0 and the coordinator rotary address may not be shown.
Facility View may not show all the devices in the network. You may have to refresh the navigation
tree with Device Discovery. The user experience with Facility View improves by directly connecting
to a unit controller with a USB cable, followed by a Device Discovery.
None of the functions under the Wireless menu work when direct connected to the SC+. If you need
any functions from the Wireless menu, connect directly to the unit controller acting as the network
coordinator.
Establishing an Air-Fi® Network
67