Trane Air-Fi WCS-SB Installation, Operation And Maintenance Manual page 54

WCS-SB/SD Configuration
4. Configure the sensor options in the order shown in the table.
Table 10. WCS—SB/SD configuration options
Setting
Temperature
• Choose Fahrenheit or Celsius
• Choose the degree resolution
(whole degrees, half degrees, or
tenths of degrees).
Setpoint
Deadband (available for dual
setpoint system only)
Note: Deadband refers to the
minimum difference between
the heating and cooling
setpoints.
System
a) Single setpoint
System (continued)
b) Dual setpoint
System (continued)
c) No setpoint
54
• Press or to scroll to the next selection (as illustrated).
• Press or to move to the next menu (as illustrated).
Configuration options
no
setpoint
.
heat/cool setpoint offset
(1.8˚F – 10.8˚F , 1˚C – 6˚C)
emergency heat/
heat/cool/auto/off
no system
options enabled
single
dual setpoint
setpoint
heat/cool/
auto/off
emergency heat/
heat/cool/off
BAS-SVX40K-EN