Table of Contents
Advertisement
WCS-SB/SD Configuration
The configuration of the WCS-SB/SD determines which system features can be accessed and changes
can be made by the tenant (for example, changes to cooling/heating mode, setpoint, or fan speed.
Verify system and associated unit features before configuring the sensor.
The building owner or operator may choose to limit tenant access to certain features. This can be done
through configuration. Or, if a sensor is configured to match all controllable features of the associated
equipment, the locking feature can be used to restrict the tenant from making changes.
Configuration Procedure
To configure the features of the WCS-SB/SD, follow this procedure in the order presented.
1. Remove the cover of the WCS-SB/SD.
2. Press the configuration button for 3 seconds
3. Press the center button on the keypad one time to begin the configuration process.
BAS-SVX40K-EN
.
Figure 39. Pressing the configuration button to enter configuration mode
The display will change to configuration mode. In configuration mode, a wrench symbol appears on
the display and the menus are separated by lines, as illustrated below.
Note: To view the display on the base model of the sensor (WCS-SB), turn the sensor over to the
back.
Figure 40. Wrench symbol signifying configuration mode
53
Hide quick links:
Advertisement
Table of Contents
