Resetting Rmon Statistics Counters - Cisco SPS208G User Manual

Statistics
RMON Statistics
STEP 2
STEP 1
STEP 2
SPS208G/SPS224G4/SPS2024 Service Provider Switches User Guide
•
Fragments — Displays the number of fragments (packets with less than 64
octets, excluding framing bits, but including FCS octets) received on the
interface since the device startup or since the counters were cleared.
•
Jabbers — Displays the total number of received packets that were longer
than 1518 octets. This number excludes frame bits, but includes FCS octets
that had either a bad Frame Check Sequence (FCS) with an integral number
of octets (FCS Error), or a bad FCS with a non-integral octet (Alignment
Error) number. The field range to detect jabbers is between 20 ms and 150
ms.
•
Collisions — Displays the number of collisions received on the interface
since the device startup or since the counters were cleared.
•
Frames of xx Bytes — Number of
since the device startup or since the counters were cleared.
Select an interface in the Interface field. The RMON statistics are displayed.

Resetting RMON Statistics Counters

Click Statistics > RMON Statistics. The
Click Clear Counters. The RMON statistics counters are reset.
To reset the statistics counters, click the Clear Counters button.
xx -byte frames received on the interface
RMON Statistics Screen
5
opens.
75