Chapter 5
Admin > Save Configuration
Admin > Save Configuration
Via TFTP
Upgrade
Select this option to upgrade the switch from a
file located on a TFTP server.
TFTP Server
The TFTP Server IP Address that contains
•
the source file to upgrade from.
•
Source File
Specifies the name of the upgrade file on
the TFTP Server.
Backup
To backup the switch configuration via TFTP,
enter the TFTP server address.
TFTP Server
Specifies the TFTP Server IP Address to
•
which the Configuration file will be saved.
•
Destination
File
Specifies
configuration file. The default is StartupCfg.cfg.
Via HTTP
This HTTP Firmware Upgrade screen is used for saving
configuration information using your Web browser.
Upgrade
Select this option to upgrade the switch from a
file on the local hard drive.
•
Source File
Type in the name and path of the file or
Browse to locate the upgrade file.
Backup
Proceed
The Proceed button is used to backup the
•
configuration to the local hard drive.
NOTE:
When downloading a configuration file,
be sure that it is a valid configuration file. If
you have edited the file, ensure that only valid
entries have been configured.
WebView Switches
the
name
of
the
Advanced Configuration
Admin > Firmware Upgrade
After you download a new image file, the device should
be rebooted. If you are downloading a new boot image,
please follow these steps:
1.
Download the new boot code. DO NOT RESET THE
DEVICE!
2.
Download the new software image.
3.
Reset the device now.
Admin > Firmware Upgrade
The Firmware Upgrade screen contains the following
fields:
via TFTP
Defines the upgrade through a TFTP Server.
via HTTP
Allows you to upgrade the firmware using your
Web browser.
Upgrade
Defines the screen functionality as a Firmware
upgrade.
Backup
Defines the screen functionality as a Firmware
backup.
TFTP Server IP Address
Specifies the TFTP Server IP
Address from which files are downloaded.
Source File Name
Specifies the file to be downloaded.
Destination File name
Specifies the destination file type
to which the file is downloaded. The possible field values
are:
Software Image
Downloads the Image file.
Boot Code
Downloads the Boot file.
59