SET (Setting) Mode
4.
Align the Scanner on the code to be read and press the Trigger
Switch on the Scanner.
Images taken at 4 shutter speeds will be saved in memories 0 to
3.
Memory
Memory 0
Memory 1
Memory 2
Memory 3
Input trigger and get the image
for model registration.
(If you register model from the
stored image, input ENT Key.)
5.
Select one of the images from memories 0 to 3 using the
Shift+Up/Down Keys and press the ENT Key.
Select image with SHIFT+↑↓ Key
and input ENT key. ESC key is
back to previous display.
Shutter speed
1/250
1/500
1/1000
1/2000
1. Read QR (Pattern)
Model Registration
1. Read QR (Pattern)
Model Registration
Section 5-1
Through
Mem 0
1/250
79