Omron V530-C300E Operation Manual page 89

SET (Setting) Mode
1. Read QR (Normal)
Note Items 2 and 3 above can be set using the teaching function.
It is possible to view and, if necessary, change the parameter set-
ting in Reading Settings (Manual).
page 73
ABCDE12345
GrayEdgeVal: 18 (11~26), Rev: OFF
The parameters obtained are displayed. These
parameters are used as settings.
Only the read data (ABCDE12345 in this example)
is output to RS-232C.
If reading is not performed correctly, the teaching function will stay
ON. To turn the teaching function OFF, select Reading Settings
(Manual) from the screen shown in step 2, and press the ENT
Key. The teaching function will be turned OFF by entering the
Reading Settings (Manual) window.
The reading conditions can be set manually. If parameters have been
set using the teaching function, those parameters can be viewed or
changed, if necessary, from this menu.
A
Symbol Color
Right&Left Reverse
B
Gray Edge Value
C
Gray Edge Value Retry
D
E Timeout
RUN
Reading Settings (Manual)
Section 5-1
OK 6568ms
Freeze (3)
: Black
: OFF
: [32]
: OFF
: [500]ms
73