Table of Contents
Advertisement
SET (Setting) Mode
1. Read QR (Normal)
1. Read QR (Pattern)
1,2,3...
Procedure
1,2,3...
76
Display Settings
Display Settings
Set the contents displayed in RUN mode. The processing time will
increase in proportion to the number of display items selected.
Reading Data
A
Detail Data
B
C
Finder Pattern
Cell Position
D
1.
Select whether or not to display reading data on the screen. (The
default setting is ON.)
2.
Select whether or not to display detailed data on the screen. (The
default setting is ON.)
If turned ON, information such as detailed information about
codes and pixels per cell, etc. is displayed.
3.
Select whether or not to display finder pattern positions on the
screen. (The default setting is ON.)
4.
Select whether or not to display cell recognition positions on the
screen. (The default setting is ON.)
1.
Select Read**.
0. Image Adjust (DM)
1. Read DM (Normal)
2. Image Analysis
Select the Reading Parameters.
1. Read DM (Normal)
1. Read DM (Pattern)
Section 5-1
Display Settings
Display Settings
:
ON
:
ON
:
ON
:
ON
Advertisement
Chapters
Table of Contents
Troubleshooting
