Omron V530-C300E Operation Manual page 107

SET (Setting) Mode
2. Image Analysis
1,2,3...
Performs the following 5 hardware checks on the Controller and
Scanner.
No. Item
1 RUN indicator
2 OK indicator
3 Trigger input
4 External trigger input
5 SW1 to SW6 on DIP switch
1. Select 2.Image Analysis.
0. Image Adjust
1. Read DM (Pattern)
2. Image Analysis
Analyse input image.
2. Select Hardware Check.
3. Select the item to be checked with the Up/Down Keys.
Hardware Check
Display Pixel Value
Image Magnifier
Measure Length
Hardware Check
Contrast (Line Bright)
Contrast (Region)
RUN LED
OK LED
Input Trigger
Input Controller TRIG
I/O SW1 to SW6
Section 5-1
91