Omron V530-C300E Operation Manual page 100

SET (Setting) Mode
Procedure
1,2,3...
84
If Display Settings/Finder Pattern is set to ON, whether finder pat-
terns can be detected or not can be confirmed on the screen.
If detection is not possible, decrease the correlation threshold value
and the pixel skipping parameter and check the model image. If, on
the other hand, too many places are detected, increase the correla-
tion value and pixel skipping parameter.
1. Select Read QR (Pattern).
0. Image Adjust
1. Read QR (Pattern)
2. Image Analysis
Select the Reading Parameter.
2. Select Reading Settings.
3. Set the items as required.
Symbol Color
Right &Left Reverse
Pixel Skipping
Correlation
Version
Timeout
4. Select Register to validate the settings and leave this window.
Pattern Settings
Reading Settings
Display Settings
:
:
: [ 4]
: [30]
:
: [500]ms
Section 5-1
Black
OFF
1