Omron V530-C300E Operation Manual page 43

Timing Charts
OK Result Obtained after Repeated Reading
OFF
Trigger switch:
TRIG terminal
ON
Not lit
OK indicator
Lit
RS-232C
Note
NG Result after Repeated Reading
OFF
Trigger switch:
TRIG terminal
ON
Not lit
OK indicator
Lit
RS-232C
Note
Read executed. Read executed.
NG
1. The output time to RS-232C changes depending on the data vol-
ume or baud rate.
2. The OK indicator will turn OFF when the next trigger is input or a
through image is displayed.
Read executed. Read executed.
NG
1. The output time to RS-232C changes depending on the data vol-
ume or baud rate.
2. The OK indicator will turn OFF when the next trigger is input or a
through image is displayed.
3. Error outputs can be enabled or disabled via a setting. The default
is "OFF" (disabled).
OK
Result: OK
Read executed.
NG
NG
Section 3-7
Result: NG
Error
code
27