Omron V530-C300E Operation Manual page 148

Error Codes
Save System + Scene Data via XModem: @AS
Send
Receive
Load Image Data via XModem: @BL
Send
@ B
132
Saves system and scene data using the XModem protocol.
The V530-C300E will send "READY" to the external device when it is
ready to save. Transfer system and scene data after receiving
"READY."
Save System + Scene Data via XModem Command
Data Saved Correctly
<Header>
Data Not Saved Correctly
<Header>
Loads image data using the XModem protocol. The V530-C300E will
send "READY" to the external device when it is ready to load. Trans-
fer the image data after receiving "READY".
Load Image Data via XModem Command
<Memory 1>
L
Memory 1 and 2: Specify the image number as a 2-digit decimal
number, e.g., specify storage memory 10 as follows:
@BL<space>10.
@ A S
O K
E R
<Memory 2>
Section 6-3
<Footer>
<Footer>
<Footer>
<Footer>