Omron V530-C300E Operation Manual page 104

SET (Setting) Mode
Procedure
1,2,3...
88
1. Select 2.Image Analysis.
0. Image Adjust
1. Read DM (Normal)
2. Image Analysis
2. Select Image Magnifier.
3. Move to the specified area using Up/Down/Left/Right Keys.
Press the SHIFT Key at the same time to move faster.
4. Press the ENT Key.
A magnified image is displayed within a dotted frame.
5. Press the ESC Key to leave this screen.
Display Pixel Value
Image Magnifier
Measure Length
Hardware Check
Contrast (Line Bright)
Contrast (Region)
Section 5-1