Omron V530-C300E Operation Manual page 86

SET (Setting) Mode
1. Read QR (Normal)
Teaching
Procedure
1,2,3...
70
Using the teaching function, a reading image is obtained, measure-
ment is performed on this image, and based on the results of this
measurement, parameters for reading conditions (Right & Left
Reverse, Gray Edge Value, Shutter Speed) are automatically deter-
mined. The results of the settings made using the teaching function
can be viewed in Reading Settings (Manual).
1. Select Read QR (Normal).
1.Read QR (Normal)
2. Select Reading Settings (Teaching).
Reading Settings (Teaching)
Select the Reading Parameters.
Reading Settings (Teaching)
Reading Settings (Manual)
Display Settings
Section 5-1