Omron V530-C300E Operation Manual page 72

SET (Setting) Mode
1. Read DM (Normal)
Teaching Procedure
1,2,3...
56
Using the teaching function, a reading image is obtained, measure-
ment is performed on this image, and based on the results of this
measurement, parameters for reading conditions (symbol color, Right
& Left Reverse, Length of Finder) are automatically determined. The
results of the settings made using the teaching function can be
viewed in Reading Settings (Manual).
1. Select Read DM (Normal).
A through image will be displayed automatically.
0. Image Adjust (DM)
1. Read DM (Normal)
2. Image Analysis
Select the Reading Parameters.
2. Select Reading Settings (Teaching).
3. Select the code size.
Use the Up/Down Keys to select the required setting, and validate
this setting by pressing the ENT Key. The display will return to the
window shown in step 2.
Reading Settings (Teaching)
Reading Settings (Teaching)
Reading Settings (Manual)
Display Settings
10×10
12×12
14×14
16×16
18×18
20×20
22×22
24×24
26×26
Section 5-1