Omron V530-C300E Operation Manual page 63

SET (Setting) Mode
Procedure
1,2,3...
1. Enter the SET mode.
The following items will be displayed.
QRCode (Normal)
QRCode (Pattern)
DataMatrix (Normal)
DataMatrix (Pattern)
This mode can normally be used
for DataMatrix reading.
2. Select the required item using the Up/Down Keys and press the
ENT Key.
Example: If QRCode (Normal) is selected, the following screen
will be displayed.
0. Image Adjust
1. Read DM (Normal)
2. Image Analysis
Select the shutter speed and
BGS Levels.
Section 5-1
47