Omron V530-C300E Operation Manual page 151

Error Codes
Read System Data via RS-232C: @YR
Send
Receive
Note Eighteen digits are set from (1) to (12).
Write System Data via RS-232C: @YW
Send
@ Y
Note Refer to the table of system data for settings (1) to (12). page 136
Receive
The system data settings are output as numeric values
Load System Data via RS-232C Command
Reception OK
<Header>
(1)
Changes the system data settings. OK is output if the command is
received normally; ER is output if the command is not received nor-
maly.
Save System Data via RS-232C Command
W (1)
Command Interpreted and Setting Items Match
<Header>
Command Interpreted and Setting Items Do Not Match
<Header>
@ Y R
(2) (3)
(2) (11)
O K
E R
Section 6-3
<Footer>
<Footer>
(11) (12)
<Footer>
(12)
<Footer>
<Footer>
135