Installation Precautions
Installation
Orientation of Controller
INCORRECT
Ambient Temperature
xii
To improve heat dissipation, install the controller in the following ori-
entation only:
CORRECT
Do not install the controller in the orientations shown in the following
diagram.
• Maintain a minimum clearance of 50mm above and below V530-
C300E components to improve air circulation.
• Do not install V530-C300E components immediately above
strong heat sources, such as heaters, transformers, or large-
capacity resistors.
• Do not let the ambient operating temperature exceed 50C for
the Controller or 38C for the Scanner.
INCORRECT
3