Omron V530-C300E Operation Manual page 108

SET (Setting) Mode
92
Selecting RUN LED
4. If the RUN indicators on the Scanner and Controller light at 1-s in-
tervals, the hardware is normal. Press the ESC Key to return to
step (3).
Confirm RUN LED
ESC: Back to previous display
Selecting OK LED
4. If the OK indicator on the Scanner lights at 1-s intervals and the
buzzer sounds at 1-s intervals, the hardware is normal. Press the
ESC Key to return to step (3).
Confirm OK LED and Buzzer
ESC: Back to previous display
2. Image Analysis
Hardware Check
2. Image Analysis
Hardware Check
Section 5-1