Omron V530-C300E Operation Manual page 130

Tool Mode
Procedure
1,2,3...
Operation Examples for Personal Computers
114
1. Select the item to be processed.
2. Select the scene or image when scene or image data has been
selected.
• Scenes (0 or 1)
• Images (Memory 0 to 23, Image 0 or 1)
3. Select Execute when the confirmation message is displayed.
This section describes data transfer using the Hyper Terminal pro-
vided on Windows 95, 98, Me, 2000, and NT4.0 computers. In this
example, a RS-232C cable is connected to the COM1 port of the
computer. Alter the example to suit your communications software or
COM port number.
Data transfer is performed with XMODEM (-CRC or -SUM) protocol
method.
System data Load
System data Save
Scene data Load
Scene data Save
Sys + scn Load
Sys + scn Save
Image data Load
Image data Save
Scn 0
Scn 1
(e.g.) When saving system data:
Section 5-4