Omron V530-C300E Operation Manual page 54

Basic Operations Using the Console
Data Matrix Reading
38
2. Move to SET using the Up Key and press the ENT Key.
The following screen is displayed. The screen is in SET mode.
This mode can normally be used
for DataMatrix reading.
Select the required matrix size. The other reading conditions can be
set using the teaching function. Using the teaching function, a read-
ing is performed on the reading object and, based on this, parame-
ters are set automatically.
3. Select DataMatrix (Normal) and press the ENT Key. The follow-
ing screen will be displayed.
0.Image Adjust (DM)
1.Read DM (Normal)
Select the Reading Parameters.
4. Select 1. Read DM (Normal) and press the ENT Key.
QRCode (Normal)
QRCode (Pattern)
DataMatrix (Normal)
DataMatrix (Pattern)
Section 4-3