Omron V530-C300E Operation Manual page 77

SET (Setting) Mode
1. Read DM (Pattern)
Note There is an orientation tolerance of –10• with this method. Mod-
Model
Note When using this menu, set the code size to satisfy the following
2. Select Reading Settings (Manual).
3. Set the items as required.
Symbol Color
Right &Left Reverse
Matrix Size 1
Matrix Size 2
Free Finder Length
Length of Finder
Background Cut
Timeout
4. Select Register to validate the settings and leave this window.
The method of registering model images of finder patterns, and using
these models to find finder patterns from input images is called "pat-
tern search." Because image patterns are used, code positions can
still be found with greater accuracy than with Normal mode, even if
the printing quality is poor.
els cannot be detected for deviations greater than this.
Search
conditions.
• There are more than 10 pixels per cell.
• There is a margin of at least 2 cells around the code.
Reading Settings (Teaching)
Reading Settings (Manual)
Display Settings
Pattern Settings
Section 5-1
: Black
: OFF
: 10×10
: None
: OFF
: [150]
: Middle
: [1000]ms
The higher correlation
value (similarity) is de-
tected as a finder pat-
tern.
61