SET (Setting) Mode
Procedure
1,2,3...
90
1.
Select 2.Image Analysis.
0. Image Adjust
1. Read DM (Normal)
2. Image Analysis
Analyse input image.
2.
Select Measure Length.
3.
Move the cross cursor to the beginning point using Up/Down/Left/
Right Keys and press the ENT Key.
Press the SHIFT Key at the same time to move faster.
4.
Specify the end point in the same way.
The length of the straight line is measured.
5.
Press the ESC Key to leave this screen.
Display Pixel Value
Image Magnifier
Measure Length
Hardware Check
Contrast (Line Bright)
Contrast (Region)
Section 5-1