Omron V530-C300E Operation Manual page 113

SET (Setting) Mode
Scn 0 = SET = 2. Image Analysis
1
4
1,2,3...
Note Analysis is not possible for through images.
• The display will be as follows if the line is more than 45
zontal:
255
+
Blk: 62 Wht: 224 Contrast: 0.73
1. Specify the beginning and end point of the line for which density
distribution is to be displayed.
2. The density distribution is displayed.
3. The ratio of black and white with respect to the gray edge value is
displayed.
4. The average densities of the black and white cells will be dis-
played along with the contrast (density ratio). The contrast will be
displayed between 0.00 and 1.00. The larger the numeric value,
the higher the contrast.
Contrast (Line Bright)
+
Section 5-1
•
0 Wht Blk
2
off hori-
3
97