SET (Setting) Mode
Procedure
1,2,3...
86
1.
Select 2.Image Analysis.
0. Image Adjust
1. Read DM (Normal)
2. Image Analysis
Analyse input image.
2.
Select Display Pixel Value.
3.
Move to the required area by using the Up/Down/Left/Right Keys.
The density information will be displayed.
Press the SHIFT Key at the same time to move faster.
4.
Press the ESC Key to leave this screen.
Display Pixel Value
Image Magnifier
Measure Length
Hardware Check
Contrast (Line Bright)
Contrast (Region)
Section 5-1