Checking The Frame; Checking The Link Fork; Checking The Throttle Cable Routing - Husqvarna TC 85 2023 Owner's Manual

11.39

Checking the frame

11.40

Checking the link fork

11.41

Checking the throttle cable routing

Warning
Danger of accidents The throttle cable can become kinked, trapped or blocked if it is not routed cor-
rectly.
If the throttle cable is kinked, trapped or blocked, the speed can no longer be controlled.
–
Make sure that the throttle cable routing and the play in throttle cable complies with the specifica-
tion.
SERVICE WORK ON THE CHASSIS 11
–
Check that the chain guide is firmly seated.
» If the chain guide is loose:
–
Tighten the screws on the chain guide.
Guideline
Remaining
screws, chassis
Remaining nuts,
chassis
H02532-01
Finishing work
–
Remove the motorcycle from the lift stand. (
–
Check the frame for damage, cracks, and deformation.
» If the frame shows signs of damage, cracks, or deforma-
tion:
–
Change the frame.
Guideline
Repairs on the frame are not permitted.
V00858-01
–
Check the link fork for damage, cracking, and deformation.
» If the link fork shows signs of damage, cracking, or defor-
mation:
–
Change the link fork.
V00857-01
Preparatory work
–
Remove the seat. (
–
Remove the air filter box cover. (
–
Remove the right side cover. (
M6
M6
Info
Always replace a damaged link fork. Husq-
varna Motorcycles does not permit repairing
link forks.
p. 57)
p. 57)
p. 61)
10 Nm (7.4 lbf ft)
10 Nm (7.4 lbf ft)
p. 45)
69