Disassembling The Seal Ring Retainer - Husqvarna FC 250 2018 Repair Manual

9 SHOCK ABSORBER, LINK FORK
9.16
68

Disassembling the seal ring retainer

Main work
-
Clamp the piston rod with the fork in a bench vise.
Guideline
I Use soft jaws.
O.
-
Remove nut
-
Remove washer @.
-
Remove rebound shim stack@).
• Info
I
Guide the rebound shim stack onto a screwdriver and
put them aside together.
C,.
-
Remove piston
-
Remove compression shim stack
Info
Guide the compression shim stack onto a screwdriver
and put them aside together.
-
Remove rebound washer
-
Remove seal ring retainer@.
-
Remove locking cap@) and rubber buffer@).
Preparatory work
-
Remove the spring. (8 p. 65)
-
Disassemble the damper.
-
Disassemble the piston rod.
0.
(D.
(8 p. 66)
(8 p. 67)