Figure 33: Motherboard Battery - EFI E-85 Installation And Service Manual

3 Carefully push the clip away from the battery until the socket ejects the battery.

Figure 33: Motherboard battery

1
2
3
1 Clip
2 Battery
3 Socket
4 Slide the battery out of its socket.
5 To insert a new battery, slide it into the socket so that the positive (+) side of the battery faces up.
6 Press the battery down into the socket until it snaps into place.
Make sure that the battery is securely installed in the socket.
7 Reassemble the E-85 and verify its functionality (see
8 Configure the time and date in Setup.
For more information, see Configuration and Setup, which is part of the user documentation set.
Installation and Service Guide: Color Controller E-85
page 83).
65
Replacing parts