4 Remove the media pack from the accessory kit and check it for damage.
5 Carefully lift the E-85 out of the box.
Connecting the E-85
Before you connect the E-85, it is strongly recommended that you review all
damage to the E-85. You must connect the following to the E-85:
•
Power cable
•
Network cable
Crossover Ethernet cable (lower RJ-45)
•
Scan crossover cable
•
Monitor cable (option)
•
•
Wireless adapter for keyboard and mouse (option for furniture)
Installation and Service Guide: Color Controller E-85
"Precautions"
Installing hardware
on page 10 to avoid injury or
17