EFI E-85 Installation And Service Manual page 91

To create a manual backup
1 In Fiery System Restore window, click Backup Now.
If you have not logged in as an Administrator user, you are required to do so. Enter the administrator's password
(default password is Fiery.1), and click Log In.
2 In Backup dialog box, select the media in which you want your backup file saved, and click Continue.
: Select this option when you create a backup on a USB flash drive. If you want to create a backup of the current
•
USB
E-85 on the USB flash drive, select New image. You can select Create bootable image to make the USB flash drive
a bootable media.
If you want to create a factory image backup on a USB flash drive, select Fiery factory image. The Create bootable
image option will be automatically turned ON.
Note: The minimum size for the USB flash drive depends on the actual size of the backup file. You can determine
the size of the backup file by checking the Estimated size: field in the Create USB Backup dialog box. Prepare the
USB flash drive with enough capacity.
Note: Due to a file system restriction, the maximum size of the USB flash drive is 32GB if the Create bootable
image option in ON. You can use a USB flash drive with more than 32GB capacity if the Create bootable image is
OFF.
•
Internal hard drive
name of the backup image. The default image name is the server name of the E-85.
3 Make sure to connect the USB drive to the USB connector on the E-85.
Note: If the capacity of the USB flash drive is less than size of the value listed in Estimated size: field, the backup
process will not take place.
4 Click Continue.
To restore the backup image
1 In Fiery System Restore window, select Restore.
2 Make sure that your backup image is accessible from the E-85.
If you restore a backup image stored on the USB flash drive, be sure to attached the USB drive to one of the USB drive
on the E-85.
3 Select one of the following restore options:
•
Restore from a local image
•
Restore from a USB storage device
•
Restore from the factory default image
4 If you select a restore from a USB drive, make sure to connect the USB drive to the USB connector on the E-85.
: Select this option when you create a backup on the HDD of the E-85. You must specify the file
Installation and Service Guide: Color Controller E-85
Performing Backup and Restore
91