Command Workstation; About Configure - EFI E-85 Installation And Service Manual

To print E-85 pages
1 At Fiery Ticker screen, click ">>" icon on the upper left corner, and choose Print Pages.
The Print Pages sub-menu displays the list of available E-85 pages.
2 Choose the page that you want to print from the sub-menu.
The E-85 sends the selected page to the printer.
3 If you printed the E-85 Test Page, examine the quality of the Test Page from the printer.
If the Test Page prints, you know the E-85 is functional and the connection between the E-85 and the printer is working.
If the Test Page fails to print, look up printing problems in
When you examine the Test Page, keep in mind the following:
All color patches should be visible, even though they may be very faint in the 5% and 2% range.
•
Each color's patch set should show uniform gradation from patch to patch as the color lightens from 100% to 0%.
•
Poor image or color quality may indicate a need to calibrate the system or service the printer. Information on the Test
Page includes the date and time of the last calibration so the Test Page can be kept for future reference. For more
information, look up printing problems in
Printing, which is part of the user documentation set.

Command WorkStation

As an E-85 service technician, you will typically log on to the system as Administrator. For more information about using
Command WorkStation, see Command WorkStation Help.

About Configure

You can access Configure from Command WorkStation or WebTools. For information about using Configure, see the
Command WorkStation Help.
To access Configure from an Internet browser
1 Open an Internet browser and type the IP address of the E-85.
2 In WebTools, click Configure icon on the left.
3 Log on with Administrator privileges.
To access Configure from Command WorkStation
1 In Command WorkStation, as Administrator, do one of the following:
• In the Server menu, click Configure.
From the SERVERS list, right-click the E-85 and select Configure.
•
In Device Center, on the General, click Configure button in lower right corner.
•
Installation and Service Guide: Color Controller E-85
"Table 6: E-85 error messages and conditions"
"Table 6: E-85 error messages and conditions"
Using the E-85
on page 109.
on page 109, or see Color
28