EFI E-85 Installation And Service Manual page 39

4 (If applicable) On the monitor, log in.
Type Fiery.1 exactly. The password is case-sensitive; for example, fiery.1 will not work.
If it is not the first time the E-85 has been started after installing system software, the site administrator may have set a
different user name and password. The site administrator at the customer site must provide you with the correct user
name and password to enable your logon to the system (the password is case-sensitive and must be typed exactly).
Note: If the password is lost, you must reinstall all system software (see
5 Wait for Fiery Ticker to display and reach Idle (requires approximately 3 minutes).
6 If Command WorkStation starts automatically, connect to the E-85 with Administrator privileges.
If Command WorkStation was connected to the E-85 during the previous session, the connection may be reestablished
automatically.
If the E-85 is currently disconnected, select the E-85 from the Servers List and click Connect. Choose Administrator
from the User menu, type Fiery.1 in the Password field, and then click Login.
Note: Fiery.1 is the default password required to connect to the E-85 with Administrator privileges. The password can be
changed in E-85 Setup. For more information, see Configuration and Setup, which is part of the user documentation set.
To shut down, restart, or reboot from the monitor
1 Make sure that the E-85 is not receiving, processing, or printing any files.
If the system just finished processing, wait at least five seconds after the system reaches Idle before you proceed.
2 Close all applications except Fiery Ticker.
3 Do one of the following:
Click the Windows Start button, click Power icon, and select Shut down.
•
Click the Windows Start button, click Power icon, and select Restart.
•
Click ">>" icon in the Fiery Ticker and select Server Actions > Restart Fiery. Click OK.
•
4 If you shut down the E-85, move the E-85 power switch to the off (O) position for maximum energy savings or service
(wait 10 seconds before you proceed).
5 On the monitor, log in.
Type Fiery.1 exactly. The password is case-sensitive; for example, fiery.1 will not work.
If it is not the first time the E-85 has been started after installing system software, the site administrator may have set a
different user name and password. The site administrator at the customer site must provide you with the correct user
name and password to enable your logon to the system (the password is case-sensitive and must be typed exactly).
Note: If the password is lost, you must reinstall all system software (see
6 Wait for Fiery Ticker to display and reach Idle (requires approximately 3 minutes).
Installation and Service Guide: Color Controller E-85
page 97).
page 97).
39
Using the E-85