EFI E-85 Installation And Service Manual page 90

You must login to the system as a system administrator to use the Fiery System Restore features.
To access Fiery System Restore on Fiery QuickTouch
1 On Fiery QuickTouch, tap the Quick launch icon on the bottom-left corner of the screen.
2 Tap the Fiery System Restore icon and log in as a system administrator.
3 Follow the on-screen menus to schedule automatic backups, manually back up the E-85, or restore the E-85.
To access the Fiery System Restore from Command WorkStation
1 Start Command WorkStation and login to the E-85 with Administrator privileges.
The default Administrator password is Fiery.1 (case-sensitive), but the site administrator may have changed the
password.
2 From Server menu, select Device Center.
3 Click Tools on the left side, and then click Fiery System Restore.
The Fiery System Restore will be displayed on a default web browser window.
To access the Fiery System Restore from WebTools
1 From a client computer, start a web browser and enter the IP address or the DNS name of the E-85.
2 In WebTools, select Fiery System Restore icon on the left side.
The available features are listed under Fiery System Restore section.
You must log in to the system as a system administrator before performing any of the backup/restore process.
Note: The following tasks describe using Fiery System Restore on WebTools. Fiery QuickTouch uses the same menu
selections and features for backing up and restoring the E-85. Refer to the following tasks if you are using Fiery System
Restore on Fiery QuickTouch.
To setup automatic scheduled backup
Note: When you set up the scheduled backup, only the latest backup will be stored. Previous backups will be deleted.
1 In Fiery System Restore window, click Schedule Backup.
If you have not logged in as an Administrator user, you are required to do so. Enter the administrator's password
(default password is Fiery.1), and click Log In.
2 Select Enable automatic backup, and select when you want to start the backup process on the E-85.
Note: The backup process takes more than an hour to complete and it requires the E-85 to be Idle status. If the E-85 is
not in Idle status, the backup process does not start.
3 Click Save.
Installation and Service Guide: Color Controller E-85
Performing Backup and Restore
90