Network Status Leds; Figure 17: Ethernet Network Port (Upper Rj-45) - EFI E-85 Installation And Service Manual

6 If you printed the Test Page, examine the quality of the page.
If the Test Page prints, you know the E-85 is functional and the connection between the E-85 and the printer is working.
If the Test Page fails to print, look up printing problems in the Troubleshooting table on
When you examine the Test Page, keep in mind the following:
All color patches should be visible, even though they may be very faint in the 5% and 2% range.
•
Each color's patch set should show uniform gradation from patch to patch as the color lightens from 100% to 0%.
•
Poor image or color quality may indicate a need to calibrate the system or service the printer. Information on the Test
Page includes the date and time of the last calibration, so the Test Page can be kept for future reference. For more
information, look up printing problems in
Printing on the User Documentation CD.

Network status LEDs

Two LEDs next to the network connector indicate the network link status and speed. For additional information about
network setup, see Configuration Guide, which is part of the user documentation set.

Figure 17: Ethernet network port (upper RJ-45)

1
2
1 LINK/ACTIVITY
2 SPEED
Network link indicators
Table 1:
LINK/ACTIVITY LED
Off
Solid green
Flashing green
Network speed indicators
Table 2:
SPEED LED
Off
Solid green
Solid amber
"Table 6: E-85 error messages and conditions"
Network link status
No link to network
Valid link to network
Data transfer is in progress
Network speed
10 Megabits/second
100 Megabits/second
1000 Megabits/second
Installation and Service Guide: Color Controller E-85
Using the E-85
page 109.
on page 109, or see Color
37