Figure 40: Removing/Replacing The Power Supply - EFI E-85 Installation And Service Manual

11 Slide the power supply toward the front panel and take the power supply off from under the chassis bar.

Figure 40: Removing/replacing the power supply

1 Power supply unit
2 Chassis bar
3 Screw (1 of 4)
Note: To service the power supply, place the E-85 in an upright position.
To replace the power supply
1 Make sure that the E-85 is in upright position.
2 Position the power supply inside the chassis (see
Insert the power supply unit under the chassis bar, and place the power supply on top of the left and right chassis bars.
Position the power supply so that it is flush against the connector panel.
3 Install the four screws that secure the power supply to the connector panel of the chassis.
4 Replace the motherboard (see
2
Figure 40
page 60).
Installation and Service Guide: Color Controller E-85
1
3
on page 75).
75
Replacing parts