Figure 28: Front Bezel Anchor Screw; Figure 29: Front Bezel Tabs - EFI E-85 Installation And Service Manual

To remove the front panel
1 Remove the anchor screw from the front bezel.

Figure 28: Front bezel anchor screw

2 Release the six tabs and pull the front bezel off.

Figure 29: Front bezel tabs

1 Top tab (one on each side of bezel)
2 Middle tab (one on each side of bezel)
3 Bottom tab (one on each side of bezel)
To replace the chassis panels
1 Attach the front bezel to the front of the unit snapping tight the six tabs. See
2 Insert the anchor screw to secure the front bezel. See
Installation and Service Guide: Color Controller E-85
1
2
3
Figure
Figure 28.
Replacing parts
29.
50