Table of Contents
Advertisement
Using the E-85
You can access the E-85 by using the Fiery QuickTouch
other functions.
•
The printer touch panel (see
•
Fiery NX Station, including a monitor, keyboard, and mouse.
The Fiery QuickTouch, a seven-inch LCD color touch screen interface for the E-85.
•
Fiery Ticker
When you log on to the E-85 using the monitor or Remote Desktop Connection, Fiery Ticker automatically starts showing
the status bar.
Figure 10: Fiery Ticker status bar
Menu
Access
You can perform the following tasks using the Fiery Ticker:
Monitor the activities of the E-85 and printer using the Fiery Notes.
•
Manage the E-85 by using Command WorkStation or WebTools
•
•
Shut down, restart, or reboot the E-85
For details, see the Fiery Ticker Help. To access the Fiery Ticker Help, click ">>" icon at the upper left corner of the
screen, and select Help.
Printing E-85 pages from the monitor, keyboard, and mouse
This section describes how to print the Test Page, Server Configuration page, and other Fiery pages.
•
verifies that all components of the E-85-to-printer interface work. The Test Page is a color file that resides on
Test Page
the E-85 hard disk drive.
Note: Information regarding Test Page refers to PS Test Page or PCL Test Page. For more information, see
Configuration and Setup, which is part of the user documentation set.
•
Server Configuration page
customer's current settings for Setup, the current calibration, and the IP address of the E-85.
Printing the Server Configuration page can be helpful during installation, Setup, and service. After installing the E-85
(including connecting to the network) and before default settings are changed in Run Setup, you can obtain a record of
the defaults by printing the Server Configuration page.
page
33)
provides general information about the hardware and software configuration of the E-85, the
TM
. You can shut down, restart, or reboot the E-85 as well access
Advertisement
Table of Contents
Troubleshooting
