Table of Contents
Advertisement
Make sure that each connector is properly aligned with its mating connector. If the pins are offset from each other, the
•
board affected will not function properly.
3 Reassemble the E-85 and verify its functionality (see
Inspecting the system
If checking cable and board connections does not fix the problem, consider inspecting the system component by
component (see
Table
5) and verifying that each hardware component is properly installed and configured before you
decide to replace costly components.
If a component in the system you are servicing does not meet a condition listed in
problem (for example, if the system hangs before reaching Idle), locate the behavior in
conditions"
on page 109 to see the suggested action(s) for solving the problem.
Installation and Service Guide: Color Controller E-85
page
83).
Troubleshooting
Table 5
and it is not clear how to fix the
"Table 6: E-85 error messages and
104
Advertisement
Table of Contents
Troubleshooting
