Servicing Hard Disk Drives Inside The E-85 - EFI E-85 Installation And Service Manual

If you are replacing a hard disk drive with a new one, you must have the following:
The appropriate system software and documentation for the E-85 you are servicing
•
A compatible version of the user software for the networked computers that will be printing to the E-85
•

Servicing hard disk drives inside the E-85

This section describes how to remove and replace hard disk drives installed inside the E-85.
The hard disk drives are identified as follows:
• HDD1 is the 500GB hard disk drive installed in the top slot of the chassis. HDD1 is partitioned into drive letters c:\ and
d:\.
• HDD2 is the 2TB hard disk drive installed in the middle slot of the chassis.
HDD3 is the 2TB hard disk drive installed in the bottom slot of the chassis. HDD2 and HDD3 are configured together
•
as a single RAID drive, represented by drive letter e:\.
Installation and Service Guide: Color Controller E-85 77
Replacing parts