Connecting The Monitor, Keyboard, Mouse, And Power; Figure 4: Front And Connector Panel - EFI E-43A Installation And Service Manual

Key
1 Control panel
2 DVD drive
3 Eject button
4 Power button
5 Reset button
Use the reset button
N :
OTE
only if the system is
unresponsive to keyboard or
mouse actions.
6 Type A USB port
7 Type A USB port
8 Power connector
9 Power switch
|: Power On
O: Power Off
10 Network port (Upper RJ-45)
11 Monitor (DVI) port
12 Type A USB ports
13 printer interface port
(crossover Ethernet port)
and Type A USB ports
14 Type B USB port on the
printer interface board
15 OFF/ON switch for power
synchronization
T
O CONNECT THE MONITOR
I H
NSTALLING ARDWARE
1
2
3
4
5 6
Front panel
Front and connector panel
F 4:
IGURE

Connecting the monitor, keyboard, mouse, and power

Before using the E-43A, connect the monitor, keyboard, mouse, and power to the E-43A if
applicable.
,
KEYBOARD
N : For detailed information about the monitor, keyboard, and mouse, see the
OTE
documentation that accompanies those products.
1 Make sure that the E-43A is installed in the furniture and that the monitor is securely
attached to the top of the E-43A.
For more information, see the assembly instructions that accompany the furniture.
2 Place the keyboard in the keyboard tray on the underside of the furniture table top. Place the
mouse on the table top.
3 Connect the keyboard and mouse cables to the USB ports on the E-43A connector panel.
4 If the monitor cable is not already attached to the monitor, attach the cable that matches the
connector on monitor port on the E-43A. If necessary, use the port adapter included in the
furniture kit to connect the monitor cable.
7
, ,
MOUSE AND POWER
8
9
10
11
12
13
14
15
Connector panel
20