Port Triggering - TP-Link TL-WR940N User Manual

450mbps wireless n router
Hide thumbs Also See for TL-WR940N:
Table of Contents

Advertisement

Chapter 4
Done!
4. 8. 2.
Port triggering can specify a triggering port and its corresponding external ports. When
a host in the local network initiates a connection to the triggering port, all the external
ports will be opened for subsequent connections. The router can record the IP address
of the host. When the data from the internet return to the external ports, the router
can forward them to the corresponding host. Port triggering is mainly applied to online
games, VoIPs, video players and common applications including MSN Gaming Zone,
Dialpad, Quick Time 4 players and more.
Follow the steps below to configure the port triggering rules:
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
Downloaded from
ManualsNet.com
3. Go to
4. Click
Port
will be automatically filled in. Enter the PC's IP address
192.168.0.100 in the
5. Leave the status as
Note:
• It is recommended to keep the default settings of
Protocol
• If the service you want to use is not in the
can enter the corresponding parameters manually. You should verify the
port number that the service needs.
• You can add multiple virtual server rules if you want to provide several
services in a router. Please note that the
overlapped.
Users on the internet can enter
http:// 218.18.232.154) to visit your personal website.
Note:
• If you have changed the default
IP: Service Port
• Some specific service ports are forbidden by the ISP, if you fail to visit the
website, please use another service port.

Port Triggering

search engine
Configure the Router in Standard Wireless Router
Forwarding
>
Virtual
Servers.
Add
New. Select
HTTP
list. The service port, internal port and protocol
IP Address
Enabled
if you are not clear about which port and protocol to use.
Service
to visit the website.
from the
Common Service
field.
and click Save.
Internal Port
Common Service Port
Service Port
should not be
http:// WAN IP
(in this example:
Port, you should use
http:// WAN
and
list, you
38

Advertisement

Table of Contents
loading

Table of Contents