Local Management - TP-Link TL-WR940N User Manual

Chapter 4
• TCP-SYN-FLOOD Packets Threshold (5~3600)
between 5 ~ 3600. When the number of the current TCP-SYN-FLOOD packets is
beyond the set value, the router will startup the blocking function immediately.
• Ignore Ping Packet From WAN Port
ping packet from the internet cannot access the router.
• Forbid Ping Packet From LAN Port
ping packet from LAN cannot access the router. This function can be used to defend
against some viruses.
3. Click Save.
4. Click
4. 9. 3.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
accessing the router.
For example, if you want to allow PCs with specific MAC addresses to access the router's
web management page locally from inside the network, please follow the instructions
below:
1 ) Select
2 ) Enter the MAC address of each PC separately. The format of the MAC address
3 ) Click Add, and your PC's MAC address will also be listed.
Downloaded from ManualsNet.com
Blocked DoS Host List

Local Management

Security > Local Management, and you can block computers on the LAN from
Only the PCs listed can browse the built-in web pages to perform
Administrator tasks.
is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). Only the PCs with the listed
MAC addresses can use the password to browse the built-in web pages to
perform administrator tasks.
search engine
Configure the Router in Standard Wireless Router
- The default value is 50. Enter a value
- The default setting is disabled. If enabled, the
- The default setting is disabled. If enabled, the
to display the DoS host table by blocking.
44