Port Triggering - TP-Link TL-WR840N User Manual

Chapter 4
Done!
4 7 2

Port Triggering

Port triggering can specify a triggering port and its corresponding external ports. When
a host in the local network initiates a connection to the triggering port, all the external
ports will be opened for subsequent connections. The router can record the IP address
Personal Website
LAN
Home
1 Set your PC to a static IP address, for example 192.168.0.100.
2 Visit http://tplinkwifi.net, and log in with the username and
password you set for the router.
3 Go to Forwarding
4 Click Add New. Select
Port list. The service port, internal port and protocol
will be automatically filled in. Enter the PC's IP address
192.168.0.100 in the
5 Leave the status as
Note:
• It is recommended to keep the default settings of
if you are not clear about which port and protocol to use.
• If the service you want to use is not in the
can enter the corresponding parameters manually. You should verify the
port number that the service needs.
• You can add multiple virtual server rules if you want to provide several
services in a router. Please note that the
overlapped.
Users on the internet can enter
http:// 218.18.232.154) to visit your personal website.
Note:
• If you have changed the default
Service Port to visit the website.
• Some specific service ports are forbidden by the ISP, if you fail to visit the
website, please use another service port.
Configure the Router in Wireless Router Mode
Router
WAN: 218.18.232.154
> Virtual Server.
HTTP from the
IP Address field.
Enabled and click Save.
Common Service Port
Service Port
http:// WAN IP
Service Port, you should use
Common Service
Internal Port and Protocol
list, you
should not be
(in this example:
http:// WAN IP:
39