Wireless Security - TP-Link TL-WR940N User Manual

Chapter 6
• Wireless Name of Root AP
• MAC Address of Root AP
• Mode
default setting
the router.
Note:
If 11bg mixed mode is selected, the
changed.
• Channel Width
is Auto, which can automatically adjust the channel width for your clients.
• WDS Mode
to change the WDS mode unless you notice network communication problems
with root AP. If you select Auto, then router will choose the appropriate WDS mode
automatically.
• Enable Wireless Router Radio
disabled to allow or deny wireless access. If enabled, the wireless clients will be able
to access the router.
• Survey -
Point you want to connect to, and click
network's SSID and MAC address will be automatically filled into the corresponding
box.
6. 4. 2.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to
3. Configure the security settings of your wireless network and click Save.
Downloaded from ManualsNet.com
- The SSID of AP that you want to connect to.
- The MAC address of AP that you want to connect to.
- Select the desired mode. It is strongly recommended that you keep the
11bgn mixed, so that all 802.11b/g/n wireless devices can connect to
Channel Width
- Select any channel width from the drop-down list. The default setting
-This field determines which WDS Mode will be used. It is not necessary
Click this button, and the

Wireless Security

Wireless > Wireless Security.
search engine
Configure the Router in Repeater Mode
field will turn grey and the value will become 20M, and cannot be
- The wireless radio of the router can be enabled or
AP List page will appear. Find the SSID of the Access
Connect in the corresponding row. The target
98